Charging Guide
1. Select Battery Type
Power on the charger and select your battery chemistry (Lithium, Lead Acid, or LiFePO4) and voltage (12V or 24V) using the panel buttons.
2. Connect Clamps
Connect red clamp to battery positive (+) and black clamp to negative (-). The reverse polarity protection blocks charging if wired wrong.
3. Start Charging
Press Start. Charger automatically steps through the 7 stage process. LCD displays real time voltage, current, and temperature. Leave connected until fully charged.
Common Questions Before You Buy
Will it charge LiFePO4 batteries?
Yes, LiFePO4 is one of the three battery chemistries supported, alongside Lithium and Lead Acid. Select the LiFePO4 mode on the panel.
Will it revive a flat battery?
Yes, the charger can recover severely discharged or sulfated lead acid batteries through its desulfation stage. Lithium and LiFePO4 batteries with cell damage may not be recoverable.
What battery capacity can it handle?
12V batteries from 6Ah to 120Ah, 24V batteries from 6Ah to 60Ah. Covers most car, motorcycle, deep cycle, and caravan batteries.
Which plug variant for Australia?
Choose AU Plug. Note: AU plug variant includes 80cm AU plug cable plus a 3m extension cord (other plug variants have full 3m cord).
Can I leave it connected overnight?
Yes. The 7 stage smart charging includes a float stage that maintains the battery without overcharging. Safe to leave connected long term.



Works with Lithium, Lead Acid, and LiFePO4 batteries
